 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My furnace will not kick on and off by its self .Everything on it has been replaced.
Where do the wires coming from fan motor hook into ? A repair person came out started rewiring and left it for 3 days.. So I think I don't have them in the right place but everything else works perfect.. I don't have a heat pump..
|
||||
Check out some similar questions!
I have a Carrier Furnace and a Honeywell CT3200 Programmable thermostat, about 5 years old. I have it set on Auto and Hold Temp 72 degrees The furnace quit working a few days ago. The only way to get the unit started again was to reset, turn off and then turn on again, the power at the...
We live in the mountains of Colorado, and needless to say, we were -23 last week, this morning it is -14. We are trying to figure out our furnace without putting out a bunch of money. Last year we replaced our thermostat, but it's still not coming on, unless we put a wet rag over the top of the...
I've tried to clean the heat sensor ,but it didn't work,I used scotch brite pad,should I use something else/
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
I am attempting to replace a Totaline thermostat with a Honeywell RTH6300B programmable thermostat. I have both Carrier A/C and gas furnaces for both zones (2). The units are all 3 years old. After replacing the thermostat on the first zone, I can only get the heat to kick on and it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
