Ask Experts Questions for FREE Help !
Ask
    rickinsrq's Avatar
    rickinsrq Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2012, 09:28 AM
    Why does my Whirlpool Dishwasher start to fill then stop working ?
    Why does my whirlpool dishwasher start to fill then stop working ?
    rickinsrq's Avatar
    rickinsrq Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Feb 3, 2012, 09:38 AM
    Why does my whirlpool dish model GU1100XTLT1 start to fill but then stop working
    Why does my Whirlpool dishwasher model GU1100XTLT1 start to fill but then stops and the wash cycle light blinks ?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Feb 4, 2012, 08:42 AM
    The overfill switch is stuck in the "up" position. Scale (lime) will cause this when you have hard water as will soap deposits. The repair manual is here: http://dl.dropbox.com/u/8010163/Whirlpool_Dishwasher.pdf and I will leave it online for a while. Break it loose and pour a gallon of vinegar in the tub to clean out the scale, or use Lime Away.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Feb 4, 2012, 08:42 AM
    Check your other post.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool dishwasher start button flashing [ 0 Answers ]

Hi My whirlpool dishwasher ADP6515ix start button flashes 7 times pauses and then falshes 7 times again - is not doing its wash cyccle - any idea what this could be

Whirlpool dishwasher buttons not working [ 1 Answers ]

Hello, I have a Whirlpool undercounter dishwasher model number DUL300XTKQ that I purchased in July of 2002. About a month ago, the "Normal' wash button stopped working or responding to being pushed. Soon after, the 'pots& pans' stopped as well. Sometimes, I will check and the pots and Pans will...

Whirlpool dishwasher won't start [ 1 Answers ]

Hello - I hope someone can help me. I have a Whirlpool dishwasher Quiet Partner 980 series (about 11 yrs old) and it will not start. The control panel lights up and can be put in diagnostic mode per the schematic instructions. Cycling through the sequence does nothing except change the lights on...

Kenmore dishwasher won't fill at start [ 1 Answers ]

Start button but water does not come in - when I cancel the start the drain pump starts to try pump water out so that works but the water does not come in at the beginning.

View more questions Search