 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm 015
I have an intertherm e2series 015. The Heater fan doesn't always come on. You turn on the airconditioning and the fan comes on every time. But the heater won't come on sometimes, I reset the breaker on the fusepanel and that usually gets it going again. But recently that doesn't even do it. I've come home to a 50 degree house more often than not recently.I did replace the capacitor a couple of weeks ago and it seemed to be working better. But this week its been going off and staying off. Any suggestions?
|
||||
Check out some similar questions!
Pressure switch not making on flue pipe side
Model: MMHB070ABHR06 Gas Furnace It works for weeks on end and then doesn't. It shows a red light that blinks 3 times. It seems to light with several clicks, sometimes with only one click and then other times it goes through a series of clicks and then won't light.
The blower works when thermostat is switched to Fan, but there is not heat. Once I switch to Auto, there is not heat and the blower does not work. Temperature is set above the current room temperature. Would that be caused by a board issue? The red light just stays on, does not blink at...
Where are the reset button located on the inertherm. I know there are 4 please help.
I have an Intertherm furnace with electronic ignition. When it kicks on it only burns for a couple of seconds. I have changed the module, gas valve, igniter,checked the exaust flue, and thermostat... Whats up, I'm stumped. monkeypud:confused: :confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
