Ask Experts Questions for FREE Help !
Ask
    scorche's Avatar
    scorche Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 14, 2012, 04:09 PM
    Ford F-250 engine problems?
    Location of diagnostic plug in a f250 super duty - year 2000
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jan 14, 2012, 06:07 PM
    Under the dash, just to the left of the steering column. Look for a 16-pin connector.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a 97 Ford F 250. The fuel filter light comes on and the engine shuts off. The [ 4 Answers ]

The next day it runs and drives then the fuel filter light comes on again and it happens again. I have changed the filter and the fuel pump, what is going on? Frustrated Dan

2003 F-250 engine performance problems [ 1 Answers ]

My 2003 Ford F-250 6.0 diesel is fine when it is cold, but after it gets hot the engine hesitates and losses power. If I press down on the gas is runs fine for a minute. This mainly happens in the 1800-2300rpm range. I took it to a Ford dealer and they replaced the EGR valve and installed an...

Ford f-250 starting problems [ 1 Answers ]

I have a 2001 Ford f-250 7.3L Powerstroke that won't start when it is cold. It turns over, but does not fire, and blows a lot of white smoke. Any ideas? -Jaxmedic

2006 F-250 with engine problems [ 2 Answers ]

I have a 06 F250 6.0L with what I think is a fuel injection problem, or a mother board problem. I've read a great deal of web answers to peoples similar problems and they all seem to aim at the fuel delivery system. My truck will blow white or black smoke, and often lose power. It seems to me that...

1992 Ford F-250 Problems Not sure what it is. [ 1 Answers ]

I just replaced the clutch and the slave cylinder. Bled the slave cylinder and the vehicle will not slip in to gear when clutch is applied. Will start in gear but moves forward with clutch applied and pressing on the brakes while turning it over. Could this transmission or clutch problems? If...


View more questions Search