Ask Experts Questions for FREE Help !
Ask
    Aleigha8's Avatar
    Aleigha8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2012, 06:52 AM
    Kenmore washer won't fill?
    My Kenmore washer just stopped, it started filling but then just stopped and locked up. I unplugeed it but upon replugging it in the prong kept popping. I tried another small appliance and it worked just fine, what could it be
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 10, 2012, 08:44 AM
    I suspect your fill vale solenoid is dead and has shorted but you should check for water pressure reaching the valve too.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer will not fill with water [ 1 Answers ]

Got a kenmore 11020432990 washer. The water will not fill up on the tub. Water flow into the tub is good, but after about 3 inches I notice the water is draining out of the drain pipe, keeping it from filling it up. Could the water be just flowing through the drain pump or is it an electrical...

Kenmore He 47078 washer will not fill. [ 1 Answers ]

I have cleaned the inlet hoses and filters. The washer turns on and makes a noise as if it is trying to fill with water but nothing is filling into the tub. There are 9 of us in this house so we DESPERATELY need to fix it as quickly and as cheaply as possible.

Kenmore washer 417 won't fill [ 1 Answers ]

I tried warm wash/rinse to see if hot or cold would work, but still no (very little) water coming in. Not for wash and not for rinse.

View more questions Search