Ask Experts Questions for FREE Help !
Ask
    FMS248's Avatar
    FMS248 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 8, 2012, 08:31 AM
    How can I check the pressure switch on my Gibson heating and cooling unit?
    What does pressure switch is open with inducer on mean? How do I fix this?

Check out some similar questions!

Heating and cooling unit blowing air but not heating- goodman [ 1 Answers ]

It is a gas pack. Blowing air but not heating. Could it have a pilot light out?

Gibson blower motor not running. Unit outside freezes up.what's wrong? Relay Switch? [ 0 Answers ]

We have a Gibson central air and heat pump. Blower quits and unit outside freezes up. If we turn it off for a while everything works okay for a little while. Is the relay switch in the blower motor bad? If so where is it located?

Pressure switch stuck open gibson furnace [ 3 Answers ]

I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a

Auto/ on switch on Goodman/Amana Heating/cooling unit [ 2 Answers ]

I have a Goodman/Amana heating and cooloing unit (Model # PTC073B35AE) that is hooked up to a remote thermostat. What shoud the auto/on of the unit itself be placed at. It seems to be running too much and my elelctric usage is way higher than should be.

Changed from separate cooling & heating unit to combined unit [ 1 Answers ]

I have a mobile home & when it was set up in 96 we had separate cooling & heating units run off one thermostat. We had a 3 ton ac unit & an electric furnace inside for heat. This past summer we bought a 4.5 ton ac & heating combined unit. We hooked up to wiring that old ac unit was hooked up to...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.