 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gibson blower motor not running. Unit outside freezes up.Whats wrong? Relay Switch?
We have a Gibson central air and heat pump. Blower quits and unit outside freezes up. If we turn it off for a while everything works okay for a little while. Is the relay switch in the blower motor bad? If so where is it located?
|
||||
Check out some similar questions!
Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...
It from TPI Corp - 240 V Furnace F Series Model Number 2 1 F 12 T F 01 - I replaced the motor myself 2 years ago along with the Capacitor. Then it acted up again about 1 year ago and I replaced the Electric Heat Sequencer (boy was that a challenge!). The problem is that the fan stop working in the...
My blower will shut off on it's own and then the ac unit freezes up. I try to turn the blower on in the manual on mode and it will not come on; after quite awhile it will come back on and then I have to wait for the ac unit to defrost. Any suggestions?
All I want to know is how does a blower motor relay switch work. I have a wiring diagram for a 1005 GMC Sierra and when on hi spped the connetion only goes from one side of the motor to a blower motor relay switch and I need to know how this is suppose to work . So basically all I am asking is how...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
