 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
There is a red knob on the gas valve, normal position is on but you need to turn it a quarter turn to PILOT. Once in the pilot position push it in and light the pilot with a flame, hold until the thermocouple heats up enough that the flame will continue after you stop pushing the knob in. Now turn the knob back to ON.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am having problems with my Colman furnace. The pilot light is on, But when turning on the thermostat I hear a click but that's it. No burner flame. I jumped the R & W wires to check the thermostat, but in Putting power back to the furnace, nothing happens. Also checked power of the...
I see what I think is the pilot light in my furnace, with the pilot light gas line on the bottom, and the thermocouple above it. The lines feed into a copper looking box, but I can not see if the back is open or if the pilot light is inside of this box. I can not stand this cold, and I have spent 3...
My coleman gas furnace pilot will not stay lit.
The Pilot light on my Evcon furnace keeps blowing out. I have installed a roof jack extension, but that didn't seem to help. I just had the lower limit switch replace also. Any Ideas?
I need to find the location of the pilot light on a Coleman Furnace Model HAC075NS3R
View more questions Search
|
