Ask Experts Questions for FREE Help !
Ask
    dennisbarn's Avatar
    dennisbarn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2012, 02:41 PM
    Goodman Model # GDS80453ANA
    My furnace is intermittant sometimes it will turn on when I turn up the temperature sometimes it will not. Red light is constant. How do you read the last error codes so I know what to look for?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jan 5, 2012, 04:15 PM
    If your board is so equipted, it will have a button that says last error, or something like that. However, I would start by cleaning the flame senser, as it is a very common cause of intermittant operation.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is a goodman model no. Gsh103361bb a heat pump? Handler model no.aruf363616ba [ 0 Answers ]

Heat pump or forced air

Goodman GDS80453ANA won't light [ 20 Answers ]

Sequence of events: 1 raise thermostat - furnace begins sequence 2 inducer fan starts 3 pressure switch closes 4 ignitor glows full hot, 5 seconds or so after, gas flows. ( it flows as soon as relay clicks - valve appears to respond OK ) about that time ignitor turns off. Sometimes gas...

Goodman ac model gmpn100-4 [ 1 Answers ]

On the control panel circuit board b18099-13 I would like to know where the red blue and black wires from the blower motor connect to this board were these wires conect are m1 m2 heat cool and eac are a couple for speed control I would like to make it run faster the air coming out is like on...

Goodman model gmpn080-4 [ 4 Answers ]

Have a goodman model gmpn080-4 I lost blower limit pressure switch previously and seemed to be the same thing, ordered part and still does same thing. Thought it may have had a vacuum leak so I sealed the edges, as long as it is not connected (securely) to the exhaust pipe it runs fine. As soon as...

Goodman Model A32-15 [ 1 Answers ]

I understand how ot wire abasic thermostat but on my Goodman I have OTC-OT1-OT2 & OT3. What are these for?

View more questions Search