 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Comfortmaker rpj ii
Hi, I have a comfort maker prj ii gas furnace. The blower turns on, the ignitor glows and it only ignites one side of the blower. I have a Filtrete 3M-30 Thermostat and I set it for 1 Stage. This morning I decided to switch it to the 2 Stage Heat and AC, but it still will only ignite one side. The room temperature keeps dropping, which then keeps my system running to try and catch up. How do I get the other side to ignite that blower? I am not at home right now, so I cannot look anything up. I also noticed people mentioning red flashing lights, where on the system, is that located?
|
||||
Check out some similar questions!
I have disconnected the unit at the power supply waited a few minutes and as soon as I power on inducer fan starts immediately no matter if its in heat or ac mode.
I have a Comfortmaker RPJ model G-011 400050 - 08M -PD that when the power is turned on to the unit, the blower fan runs continuously and the outside AC unit runs continuously no matter what mode is set at the thermostat. (A/C or Heat). I just moved into the place and the thermostat looks like it...
I have a 13 yr old Comfortmaker RPJ II gas furnace controlled by a Honeywell digital thermostat. I have it programmed to turn on at 5:30AM. Lately, the furnace is not turning on (igniting, firing, blowing) in the morning even though its cold enough and the thermostat is sending a signal to the...
Just changed the control module because not enough voltage was going to the ignitor plug. Then the glow plug needed changing. Worked great for a few days. My 4 yr old messed with the thermostat then the heat didn't work again. Pulled the plug on the furnace to reset, then took the batteries out of...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
