Ask Experts Questions for FREE Help !
Ask
    TommyTrip's Avatar
    TommyTrip Posts: 22, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2012, 06:11 AM
    Pole wrap base cap
    I am in the process of finishing a basement, I am installing a oak pole wrap around a metal support pole. I have installed a floating Armstrong floor. My question is how do I install/secure the base cap for the pole wrap to a floating floor. All the installation advise says to glue it to the floor. Should I cut the floor and glue it to the foundation? Or glue it to the Armstrong Floor?
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Jan 4, 2012, 06:34 AM
    I'm sure it will be OK to glue it to the floor, and it will look better, be less work, and it's not taking any load.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is my backfilled base good for pole barn concrete slab? [ 2 Answers ]

I am building a pole barn this spring in S.E. Michigan (42x48). Last fall a contractor had brought in and bulldozed a base of 18 inches of clay/rock fill over the area intended for the pole barn. He stated that the year of rains, winter snow and freeze/thaw along with the compaction done by...

Heat wrap waste pipes insulate first or heat wrap first on pvc waste [ 1 Answers ]

Have mobile home in Ohio. Waste pipe froze. Do I wrap pipe with insulation and then heat wrap or heat wrap first then cover with insulation?

Base board heaters can I run two of them on a 20amp double pole breaker [ 1 Answers ]

Can I run two baseboard heaters on one 20 amp double pole breaker

Run cap and Start cap values for GE 5KCP39KG 5177AS [ 11 Answers ]

Hi there, I am trying to fix an old Goettl gas pack unit. It worked fine till 2 weeks ago. Now it starts normally with colder air for like 4-5 minutes then it sends inside warm air , no cooling . From outside I can see the condenser fan blade starting to rotate for those 4-5 minutes , low RPM...

Dry laid Flagstone: sub-base only, or sub-base and base? [ 1 Answers ]

Hi, I live in Northern VA and am installing dry laid 1.5" natural cleft flagstone on 4" of bluestone sub-base. I'd like this 500 sq ft. patio to last 20 years or more. My question: Is it overkill to add 2" of stonedust as a base on top of the bluestone sub-base, or is this unnecessary? If my...

View more questions Search