 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter 44360 blowing cold air in winter
I had a turn-dial thermostat and installed a Hunter 44360 programmable. Since then, my furnace (electric forced air Lennox) is intermittently blowing cool/luke-warm air instead of hot.
I have a two-wire system and have installed it according to the instructions. It's -5F outside and I need my house to get above 63 please! My furnace is running 24/7! |
||||
Check out some similar questions!
Philco central heater only blows cold air when it should be blowing hot air. And it will not stop blowing even when I turn off the heat. The fan is not on it is on auto.
I have a Goodman A/C for about 4 years, today my a/c started blowing warm and the outside unit is blowing cold air. Just last week I replace the filter and the a/c want out, the tech replace the capacitor because the fan went out. Now today the fan is working but the a/c is now blowing warm air...
Argh! :eek:My husband installed a new Hunter 44360 5/2 programmable thermostat and it worked for the A/C however it is time to run the heater and it doesnt work.:confused: I dont know how it was set up before and he can't remember. Here is our current set up. Please help!! its getting rather...
Firstly- I know nothing about air conditioners, wiring, and anything in between. I have attempted to replace my ancient, mercury-filled, White-Rodgers (1F58W-72) thermostat with a new digital Hunter (44360). Installation seemed to go fine, but now the unit is blowing luke-warm air instead of...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
