Ask Experts Questions for FREE Help !
Ask
    larrygrinter's Avatar
    larrygrinter Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2011, 04:33 PM
    Hunter thermostat wiring?
    I am replacing a honeywell thermostat with a hunter thermostat for a 2 stage heat pump. On the old thermostat the why and w1 spots are jumpered. In the new, there is a y1 and y2 spot as well as a w1 locacation. Where does the yellow wire go?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 31, 2011, 09:13 PM
    About the only way I can help you is to advise you to not buy, use, or install a hunter tstat. You will be lucky to get it working, and if you do don`t count on them to last very long,about 1 year is the life of the hunter junk

    , the best part about hunter tstats is I`ve made som good money going behind them and replacing them with good tstats,, you can`t beat a Honeywell
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane weathertron thermostat wiring to a hunter 44155 thermostat [ 0 Answers ]

Wiring a thermostat

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Hunter Thermostat wiring [ 6 Answers ]

Hello! I seem to have "developed" a problem tonight. I just removed my old manual thermo and labeled the wiring accordingly. It looked the heat hot came into a spot labeled "4". Then it was jumpered to Rc. So when I hooked up the Hunter programmable 44360, there was already a jumper between Rc and...

Ge thermostat to hunter thermostat wiring diagram [ 1 Answers ]

I'm trying to wire a hunter 42999b to 1977 ge heat pump. Need to know what wires go where there are more wires on old one then what connects to new one!

Wiring to hunter thermostat [ 1 Answers ]

My husband removed the wires from our old thermostat without labeling them. I have connected the following to a Hunter 44860: G=green wire Y1=yellow wire O=orange C=blue R=red W2=white I have a black and brown wire left over. I even looked outside at the connected wires inside the unit.

View more questions Search