Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
A 58 msa furnace, flame on but not heating house, what is the issue? And I have alrea
[ 0 Answers ]
A 58 msa furnace, flame on but not heating house, what is the issue? And I have already cleaned the filters, checked the blower and there is no LED codes.
How do I get furnace heating fan to stay on to heat the house
[ 3 Answers ]
When I turn on the heater the gas comes on in the furnace the fan in the furnace powers up and than shuts off then the gas in the furnace shuts off I reached in the furnace and turned the fan by hand and sometimes it will go through the cycle and the heat comes on and the fan will run for 30 min....
Furnace not heating the house. Damper on the furnace not opening. Motor then shuts.
[ 4 Answers ]
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
Heating furnace takes too long to heat house
[ 1 Answers ]
I have a super saver carrier furnace about 10 years old and the flame comes on perfectly but the flame goes out in about 5 minutes although the thermostat is still calling for heat. It takes a long time for the house to heat. I have cleaned the sensors for the firebox and in the fan inducer on the... View more questions Search
|