Ask Experts Questions for FREE Help !
Ask
    iorio61's Avatar
    iorio61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2011, 12:33 PM
    A 58 msa furnace, flame on but not heating house, what is the issue? And I have alrea
    A 58 msa furnace, flame on but not heating house, what is the issue? And I have already cleaned the filters, checked the blower and there is no LED codes.

Check out some similar questions!

Is it normal for furnace flame to go on and off during heating cycle? [ 2 Answers ]

When my gas furnace goes on, the flame will be on for twenty seconds then turns off for about 5 seconds. The flame then reignites and repeats this cycle until the heat kicks off. The blower is running the whole time, just the flame turns off and on until temp. reaches desired thermostat temp. Is...

How do I get furnace heating fan to stay on to heat the house [ 3 Answers ]

When I turn on the heater the gas comes on in the furnace the fan in the furnace powers up and than shuts off then the gas in the furnace shuts off I reached in the furnace and turned the fan by hand and sometimes it will go through the cycle and the heat comes on and the fan will run for 30 min....

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.