Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Howcan I tell if I need a new Ignition module
[ 0 Answers ]
Furnace type is Coleman Evcon. Problem is, I replaced the hot surface ignitor. Furnace started working but in short cycles then it stopped totally except the purge fan is on constantly.
No power to ignition module or PCM ignition fuse, any thoughts
[ 1 Answers ]
It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated
Is it tricky to replace the Ignition Module ?
[ 1 Answers ]
I have a 1990 Honda Accord Ex, 2.2L. Is it as Simple as to replacing the old One; to the New one ?
Ignition Module test
[ 2 Answers ]
Hi guys Furnace : whisperheat with ignition box close and open The furnace carries ignition model and spark sensor pilot. On G/V you can see mp mp/mv mv which are all connected to the igniton module and grnd connected to the furnace . Now the problem : When you call for heat ,the...
Ignition module replacement
[ 1 Answers ]
How do you locate and replace ignition module in my chevy 1994 pickup 1500 350 View more questions Search
|