Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to repair offset closet flange with broken bolt tabs
[ 5 Answers ]
I have removed my toilet and found an offset flange with bolt slots on three sides and two small tabs on one side. I need to reset the toilet but the little bolt tabs are broken. How do I secure the bolt to the flange if there are no tabs? I have attached an image (I think, this is my first...
Concrete slab:Toilet flange below floor level
[ 4 Answers ]
I am Installing a hardwood floor on a concrete slab. In order for that type of installation I will need to build up the sub-floor with 1/4 plywood alone with 3/4 hardwood floor. I am installing this in the bathroom. The flange of for the toilet will be about an 1" below the floor level. How do I...
Offset toilet flange
[ 5 Answers ]
I went to replace a toilet and it has an offset toilet flange and the slots are on three sides the other side had a plastic extension for the bolt with is broken. I believe it is all pvc. I went to a plumbing store and he said you can't just put a ring on top of it. I looked on line and that is...
Toilet Offset Flange
[ 2 Answers ]
I am replacing a toilet and need to move the waste line about 1 inch. How can I install an offset toil flange over existing one. Can I glue a new pvc offset flange into existing toilet flange / wasteline? My wasteline is 3" PVC.
How to level toilet & repair flange on cement slab
[ 5 Answers ]
I installed a new bath down stairs on cement floor that was not leveled, & I need help on how to repair pvc flange and level floor. (floor has tile on it now.) Old Harley Joe View more questions Search
|