Ask Experts Questions for FREE Help !
Ask
    DanFerraro's Avatar
    DanFerraro Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2011, 03:56 PM
    Why did my lenox gas furnace stop working after a power outage?
    Why did my lenox gas furnace stop working after a power outage?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 26, 2011, 09:19 PM
    Possible blown transformer, I`m saying this after guessing you have checked the breakers in main power box
    Also check the circuit board see if there might be a fuse that could be bad
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help with a furnace that hasn't worked since a power outage [ 2 Answers ]

I have a Goodman furnace that is relatively new, and it was working properly until we had a power outage. Now all I get is cold air blowing. Help me please, we are freezing in Ferndale, Michigan. What do I need to do? I checked the fuse box, and all circuits are on.

Blower in Lennox Unit is not Working after Power Outage [ 1 Answers ]

Hi, I have a Lennox A/C unit that was working just fine until last night. There was a storm and we lost power for a couple of seconds. The A/C was working during this time, but whenever the power came back in a couple of seconds, the A/C was not blowing any more. The compressor outside is...

Homart 867 Gas Furnace won't work after power outage [ 10 Answers ]

I have two Homart 867 Gas furnaces. After a lengthy power outage yesterday they won't turn back on. I was able to manually light the pilot and switch the regulator (? Name ?) to open vs. auto in order to heat my house, but when I turn it back to Auto it cuts off the gas to the burner and no heat...

G40UHX Lenox gas furnace not working [ 3 Answers ]

My LENOX gas furnace Model: G40UHX series does not work at all. I tried to start the furnace the main Blower kicks in. The Small blower does not run and Fire is not lit in ignite. The Air Condition Cooling unit is working. The Xformer has 27VAC output.

My furnace won't exnite after power outage! [ 2 Answers ]

I have a Day & Night furnace Model # 80CD-12A Series 152, It was working fine until we had a power outage. Now the pilot light has a flame, but when I turn the thermostat on the burners don't exnite. Do I need to turn the (furnance) gas totally off and restart the whole system? Is there a safety...

View more questions Search