Ask Experts Questions for FREE Help !
Ask
    philnglo's Avatar
    philnglo Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2011, 07:34 AM
    Gas furnace
    The fan comes on, the igniter lights the first burner for about 3 seconds then when the other burners should ignite it goes out and in a few seconds it try's again. I replace the flame sensor. What else could it be.

Check out some similar questions!

My carrier gas furnace would not light up the pilot burner although sparks and gas is [ 0 Answers ]

My carrier gas furnace would not light up the pilot burner although sparks and gas is present. I've tried to light up the pilot burner with a gas grill light and it works.

Have a rheem criterion 2 gas furnace (1X2000), our gas was out for three days (Tucson [ 0 Answers ]

Have a rheem criterion 2 gas furnace (1X2000), our gas was out for three days (Tucson Az ) Now it’s back on, and both furnaces start and stop about ever 4 to 10 minutes

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 1 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 0 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.