 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman evcon furance for mobile home
Have a coleman evcon furance for mobile home.I have replaced both heating elements. The heat will not come on. When I turn it on 'ON' AND heat on thermostat it works but doesn't heat up. When I turn it on auto on thermastat it comes through motions on unit but doesn't come on at all.
|
||||
Check out some similar questions!
My miller home furance MMHA-077ABHR-02 has a UT Electronic Controls 1018 series hot surface ignitor that flashing 3 times. Furance goes through the cycle for starting, solonoid for gas opens momentarily and shuts right back off, and furance will not stay burning.
In the summer my air will cut on and run through its cycle then cut off like its should but when it kicks back on the fan out side on the unit will not cut on so I have to turn the switch on the furnace in the hall to off then cool over an over till you hear the out side unit cut on and the coolent...
The furance doesn't want to start up.You can hear the fan motor hum as if it is going to run but after a min.or so it shuts down.If I lower the thermostate all the way down and leave it for several hours it will then run.I have replaced the Thermostate
The pilot light is on, but the unit won't come on to heat home, could it be the thermal coupling, or is there something else that may be causing it? Last year it did this for a few days, then it worked fine rest of the winter. Thanks for your...
What is the cooling cfm for this furnace?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
