Ask Experts Questions for FREE Help !
Ask
    buckamore's Avatar
    buckamore Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 5, 2011, 12:49 PM
    Coleman Evcon Presdential Furance
    The furance doesn't want to start up.You can hear the fan motor hum as if it is going to run but after a min.or so it shuts down.If I lower the thermostate all the way down and leave it for several hours it will then run.I have replaced the Thermostate
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #2

    Mar 5, 2011, 04:12 PM
    When you say fan motor-- Inducer motor or blower motor? If you turn the fan switch to on at the thermostat will the blower run? If no you have a blower motor or motor run capacitor that is bad.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon [ 1 Answers ]

I installed a Honeywell digital thermostat for my parents, which I have done myseld with no problems before. Foolishly, I didn't notice that the coleman evcon system has a couple more wires that the honeywell didn't have a place for, so I undid the wiring, and hooked the old therm back up. Note: I...

Coleman Evcon [ 2 Answers ]

My mother has a Coleman Evcon dgat090800 the problem is that the burner will light up on it and burn until the blower kicks on then the burner will quit I can test parts on it but am not positive what the readings should be can someone help.

Coleman evcon [ 1 Answers ]

Furnace won't ignite the starter blower runs but nothing else happens

Coleman evcon burner on and off [ 1 Answers ]

I have a 1993 coleman evcon furnace model BGD07512AX. When I get a call for heat my blower comes on right away. Then my hot surface ignitor gets red hot. Then my blower comes on for 3-5 seconds and shuts off. This happens 3 times then furnace locks out with a retry alarm. Can anyone help me? ...

Coleman evcon [ 2 Answers ]

Fan won't come on in heat position


View more questions Search