 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Goodman gms9 furnace, my exhaust and intake pipes outside were covered by a snow bank. I cleaned them off and now I have exhaust air coming out and the intake pipe is sucking fine, however, the induced draft blower comes on, but, the electronic igniter does not get hot and the gas does not...
Hi I have a Texas furnace I recently changed the circuit board, however it stopped working and the light on the board is not coming on, I checked the power to the unit and everything seems OK. Can anyone help, I live in NY and it is very cold, I would appreciate any help that is our there
Hi, I am getting 7 red flashes on the status indicator light for my Luxaire furnace, model GM9S060B12UP11G. The Diagnostic Fault Codes indicate "ignition lockout due to retries". The ventor motor starts as do the burners, there are several clicks heard and then the whole thing shuts down. The whole...
Unfortunately, it seems our furnace stopped working a couple of days ago. I can get the fan to work if I set it to "on" but not "auto". And even if the fan is blowing in the "on" setting, the air never warms up. I've tried playing with the thermostat and resetting the whole thing a few times from...
I have heat strips and just had new air handler with a/c installed in August. This morning the furnace was running and I heard a noise (like a pop) and then the fan stopped blowing. I tried to turn it on again and nothing happens. It seems like it smells like something is burning, but I don't know...
View more questions Search
|
