Ask Experts Questions for FREE Help !
Ask
    blaze710's Avatar
    blaze710 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2011, 05:05 PM
    My furnace is set at 70 and the temp drops to 64 before turning back on
    My furnace is set at 70 but the temp. Drops to 64 before it turns back on. Not sure were to start. It has a white-rogers thermostst and it just started doing this
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Dec 7, 2011, 07:36 PM
    The thermostat needs recalibrated.
    blaze710's Avatar
    blaze710 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 7, 2011, 08:23 PM
    How do I recalibrate the thermostat
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not come up to set temp [ 0 Answers ]

When the thermostat is set at 70 temperature only comes up to 58

Why is my furnace not getting up to the set temp. [ 1 Answers ]

I have a gas furnace that we run with propane. For some reason it will not stay uo to temp, we have the thermostat set at 72 and it only reaches 66-68 then shuts off. It seems to not want to kick on as often either. We just replaced the thermostat so I know its not that. Would it have anything...

My heater furnace blower comes back on after it reaches a set temp [ 3 Answers ]

My heater furnace blower comes back on after it reaches a set temp. In oither words after it gets to set temp it chuts off then a few minutes later it comes back on for a minute than chuts off again.

Furnace does not reach set temp [ 1 Answers ]

I have a similar problem re: a gas furnace that stops before reaching the desired temperature on the thermostat. I just replaced my old analog thermostat with a new digital programmable one but the problem persists. I replaced the furnace filter and cleaned the dust from the furnace but this did...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

View more questions Search