Check out some similar questions!
Why is my furnace not getting up to the set temp.
[ 1 Answers ]
I have a gas furnace that we run with propane. For some reason it will not stay uo to temp, we have the thermostat set at 72 and it only reaches 66-68 then shuts off. It seems to not want to kick on as often either. We just replaced the thermostat so I know its not that. Would it have anything...
Furnace not reaching set temp
[ 0 Answers ]
I have a lennox g50uh(x) series gas furnace. I replaced the thermostat, but still having the problem with the furnace not reaching set temp. It is set at 68 but it will go down to as low as 55 and will not reach the 68. It does turn on and the furnace seems to be working. I had someone look at the...
Furnace Not reaching set temp
[ 4 Answers ]
Hi, Having some problems with our heat, while I am away on travel so I am traying to help my wife over the phone. The thermostat is set at 68 but the house is only heating to 65. The furnace is kicking on but seems to be turning off too soon. Some of the time the thermostat indicates the system...
Furnace does not reach set temp
[ 1 Answers ]
I have a similar problem re: a gas furnace that stops before reaching the desired temperature on the thermostat. I just replaced my old analog thermostat with a new digital programmable one but the problem persists. I replaced the furnace filter and cleaned the dust from the furnace but this did...
Furnace not kicking on when temp drops below thermostat set temp
[ 1 Answers ]
I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ... View more questions Search
Add your answer here.
|