Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper way to trace electrical circuits
[ 4 Answers ]
Recently, we replaced our old Pushmatic Breaker panel with a GE unit. Now I can get new breakers without having to buy them off E-Bay. Being a cheap Ba**rd, er I mean Frugal, I saved $50 by tracing the electrical circuits myself instead of having the electrician do it. Since I had to do it, and...
Circuits
[ 2 Answers ]
Suppose that the switch has been closed for a length of time sufficiently long for the capacitor to become fully charged. (a) Find the steady-state current in each resistor. R1=16.00 kΩ, R2=12.00 kΩ, and R3=2.00 kΩ. (b) find the charge on the capacitor. 9.00V, 10.0uC I found part (a) but I'm...
New bathroom circuits
[ 1 Answers ]
I am remodeling my 2nd floor bathroom and adding laundry (gas dryer). I replacing old circuits with 2 new circuits. One dedicated to washer/dryer and another for one outlet, 2 vanity lights, 1 general illumination light, and for the exhaust fan/shower light. Can I make one 12/3 run from my...
Number of circuits
[ 5 Answers ]
I’m in the process of remolding my basement, basically 2 20x20 rooms. My question is how many separate circuits do I need for the electrical. All I’m talking about is lights and general use outlets. Could all the lights and outlets be on one circuit, or should they be separated? By room or by...
Circuits in Kitchen
[ 6 Answers ]
I just replaced my appliances in my kitchen and when installing the Fridge they had to plug it in to a different outlet from before. I didn't think it should share an outlet - but I looked at my circuit box and there doesn't seem to be a dedicated Fridge outlet. The electric range is on it's own... View more questions Search
|