Ask Experts Questions for FREE Help !
Ask
    tbohle's Avatar
    tbohle Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2011, 05:11 PM
    Hissing Price Pfister WKP 600Y when hot water is used
    I have lost significant water pressure in my Pfister WKP-600Y faucet and now it whistles or hisses when it switches to hot water. What is causing this and how do you fix it?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Nov 21, 2011, 06:20 PM
    Sounds like you've got some trash in the cartridge inlet ports.
    Shut the water off and open up the valve to remove the cartridge. Check and clear the inlet ports. Now place a pan over the valve and turn the water back on for a moment to flush out the supplies. Reassemble and test. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price pfister 26 series has good flow when I run the cold. Not so with hot [ 0 Answers ]

I have had this fawcet installed 3 yrs ago. No problems. Now(literally overnight) my hot side has very little flow. No lines kinked. Cold side runs great. Where to start?

Price Pfister hot water leaks from faucet [ 1 Answers ]

2 handle Price Pfister kitchen faucet-leaking from faucet (hot water side) nothing idicates the washers are bad. How do I know if the cartridge is bad?

New faucet, Price Pfister Genesis 53P-50SS, no hot water pressure [ 5 Answers ]

I replaced my old kitchen faucet with a Price Pfister Genesis 53P-50SS. Now I have no hot water pressure and the cold is also reduced, but not as much as the hot. Before the replacement, my pressure was fine. Price Pfister sent me all replacement parts but still no improvement. I have checked to...

Price Pfister [ 5 Answers ]

I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper


View more questions Search