Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Check DWV layout
[ 1 Answers ]
Hello I am plumbing a total rehab. There are two baths on the second floor and a kitchen with a dish washer, sink, and clothes washer. the front bath drain starts with the shower a 32x32. I have to top the joist under it so as soon as possible I put a 90 and a 90 that feed into the trap. The...
DWV Question
[ 5 Answers ]
I have a old sink drain (it was a double sink but converted to a single bowl in the early 70's). There is a threaded stub sticking out of the wall that connects back to (what appears to be a cast elbow). I've tried penetrating oil to get the stub loose (I want to cap it off back flush with the...
DWV rough-in
[ 5 Answers ]
I'm starting a long delayed home construction in a rural area with no plumbing codes in force. I plan on laying out the under slab DWV lines. Below in my amatuerish plan which I'm sure has glaring red flag issues that I need to adjust. Can you offer some input ? The main waste line run is about 40...
Why use copper for DWV?
[ 6 Answers ]
Hello, Something's been nagging me for a while. Several different kinds of material are used for DWV systems, each with its own pros and cons. PVC (and I guess ABS) is inexpensive and easy to work with, but is not allowed by all codes, and is a lot noisier (I've been to a few houses where...
DWV layout help!
[ 7 Answers ]
I am doing the rough-in on a bathroom remodel (trying to save some money). It is actually 2 small bathrooms back to back that share a 2x6 common wall - sink, toilet, shower with the mirror image on the other side. Each fixture will share common venting/drainage with its mirror fixture (sink-sink,... View more questions Search
|