Ask Experts Questions for FREE Help !
Ask
    heaxman2's Avatar
    heaxman2 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 10, 2011, 08:03 AM
    Heater, gmp100-3? My unit keeps blowing fuses
    I have a 2,300 square foot house with two unites. The unit in question heat/cools one side of the house, and we have a smaller unit that heats/cools the other side. My Goodman 100-3 unit (100K BTU) keeps blowing fuses. Repair guy said it was the circuit board. He put another one on it, and he said it shot the new one too. Do we need two units, what could be wrong with the unit that blows fuses and circuit boards, and what's the best way to repair it, or should we replace it? If so, how much would it usually cost?

Check out some similar questions!

Blowing fuses [ 1 Answers ]

Hi I have a intertherm furnace model #FEHA-017HAC-01 with a fuse "panel" 2-30 amps and 2-60 amps the 60 amp fuse on one side burns out about every week or so I also notice the disconect "plug" is getting hot on this burnt fuse side as it is starting to discolour and deforme melted any suggestions?

Heater unit blowing cold air [ 1 Answers ]

My central heat/air system Bryant Heater CU5830C175 only blows cold air. If the pilot light is out, how do I turn it on? Thank you.

Fuses blowing [ 2 Answers ]

Hello. I hope someone can help me. I have a 38” Weed Eater riding mower with a 12.5 hp Briggs & Stratton engine. I keep blowing the 30 amp fuse that is located right next to the battery. I can change out the fuse with a new one and the mower will fire right up and run great. I am not sure at...

Home central AC outdoor condenser unit blowing fuses [ 5 Answers ]

The unit is a Trane and is 22 years old and blew the 35amp dual element, time delay (current limiting) fuses that are in the little metal box on the side of my house next to the unit yesterday while running the AC during a hot day. I replaced them this morning with exact replacements and the new...

Blowing fuses in ac unit [ 4 Answers ]

I just replaced the external fan for my ac unit. The original fan had 3 wires and the new one has four. The instruction indicate that all wires may no be used and to just insulate the one I don't need. Here is my problem, I keep blowing my external 30amp fuses and tripping the circuit breaker. I...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.