Check out some similar questions!
Tub drain need to drop 26", btr to drop at 45 or 90?
[ 5 Answers ]
Hello All, I'm installing a shower and have been scratching my head on this for a while. I need to run the drain along the wall above to so I can vent it (for a foot or two), then hang a right and head toward the stack about 5' away. Due to the small crawl space and T on the stack, I need...
Off coil temperatures
[ 0 Answers ]
The consultant has given me her design conditions for a packaged unit as follows: Total coolong :274.11kW, Sensible cooling: 157.44kW, On Coil Conditions: 23.0oC and 50% RH, off coil conditions: 11.4oC/98%RH. 1.The stated on-coil and off coil conditions does not match the stated total &...
Kenmore Dishwasher does not adequately fill
[ 0 Answers ]
My Kenmore dishwasher has never adequately filled with water during the rinse or wash cycles. I have replaced the inlet valve a couple of times and the entire house is service with a water filter so I know the inlet screen is not plugged. Although we are not on city pressure, the pressure in the...
Even Temperatures
[ 1 Answers ]
I am trying to even the temperature between downstairs and upstairs. I have multiple units, with multiple thermostats. I am concerned about energy usage. How can I best go about this?
Kenmore frig not cooling adequately
[ 1 Answers ]
Why does my Kenmore refrigerator compartment not cool to a safe temperature while the upper/freezer compartment freezes well. Even with the temperature controls set at the coolest levels, the bottom compartment only reaches 45 degrees. View more questions Search
Add your answer here.
|