 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Dishwasher does not adequately fill
My Kenmore dishwasher has never adequately filled with water during the rinse or wash cycles. I have replaced the inlet valve a couple of times and the entire house is service with a water filter so I know the inlet screen is not plugged. Although we are not on city pressure, the pressure in the house is kept at 55 psi at the pump. Is there a way of increasing the fill time so the tub will fill more?
Thanks, dfreeman |
||||
Check out some similar questions!
Hello - hope someone can help! I have a Kenmore Elite dishwasher ultrawash quietguardII 577-0 Mod# 66517283401. It seems to go a complete cycle fine but the dishes aren't cleaned at all. I'm suspecting that it won't fill with water - the pump seems to be running, but no water rushing sounds on...
My dishwasher dosen' fill with enough water (it used to!) and the result is dishes that are not clean. I can tell when it's running with out enough water because it make a growling or grinding sort of noise. If I'm available, I can dump hot water in to fill it and then it works just fine till the...
My dishwasher will not fill is there anything I can do at home to fix this problem or should I throw it out?
Why does my Kenmore refrigerator compartment not cool to a safe temperature while the upper/freezer compartment freezes well. Even with the temperature controls set at the coolest levels, the bottom compartment only reaches 45 degrees.
Start button but water does not come in - when I cancel the start the drain pump starts to try pump water out so that works but the water does not come in at the beginning.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
