 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The honeywell thermostat is 10 years old. (as are the a/c units). The upstairs stat stopped working in auto mode, but when I switch it to "on", it blows cold air and works. Is the thermostat the problem (I hope) or is it something bigger? Thanks for your help!
I have two T8601D2019 thermostats in my home that were installed new when the house was built in 2002. Recently I noticed the upstairs unit was displaying a temperature four degrees below what our program was set at. Our setting is "heat" with fan at "auto". With some fiddling around with the...
I have an oil heating system that was working fine on auto mode like it should. Then a few days ago after the heat had been on and off all day pretty much I went to turn the temp up so it would kick in and the thermostat clicked like usual, but the unit didn't turn on to give me any heat. This...
Have a carrier outdoor package unit A/C and electric heat. Recently changed from the carrier programmable to a standard heat/cool stat. original stat had a light that would indicate when the filter needed changed, assume this was the blue wire that we did not connect when installing the new...
Carrier 48SB-030080301 1990 model nat gas. On a/c mode works fine. Heat- burner lites but blower will not come on at all unless on manual. I changed the J2 jumper on thermostat from hg to he to see if I could get by for a while and its been working for about a month now. Other than blast of cool...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
