 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
A/C not working on Auto mode but will run on manual mode
The honeywell thermostat is 10 years old. (as are the a/c units). The upstairs stat stopped working in auto mode, but when I switch it to "on", it blows cold air and works. Is the thermostat the problem (I hope) or is it something bigger?
Thanks for your help! |
||||
Check out some similar questions!
I have a ruud furnace and it won't turn on when set on "auto" mode,its only turning on in "manual" mode and blows heat.The fan turns on when put in the "on"/"fan" mode. I have to turn it off manually once the rooms have reached the desired temp.I could here the blowers start than they shut off...
Gas furnace is about 32 years old. This summer I noticed that switching the Fan to run in manual mode, 90% of the time it will not turn on. Suspecting the thermostat, I installed a new 7-day programmable type. 1st time I tried manual fan it worked OK. Most of the time fan will not turn on using the...
I have a Janitrol Heater/AC Model GU075-3 Serial Number 870707668 When I switch the Thermostat to Auto and Heat mode the Flame in the heater ignites and about 30 to 45 sec later goes out, The blower fan never comes on. However if I switch the Thermostat from Fan Auto to Fan on The Heater Flame...
The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...
The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
