 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Nordyne heating unit blowing cold air - flame sensor blinking then off.
My Nordyne central heating unit in my Mobile home is blowing out cold air. Last year it did this as well and we replaced the pressure switch. Now after we turn the unit on the red light holds steady but the yellow flame sensor light blinks then shuts off because there isn't enough flame to light it? What could be causing this, I am extremely frustrated because this unit is less than 5 years old!
|
||||
Check out some similar questions!
I have a gas furnace that is 4 years old. For about 3 weeks now it has been blowing out cold air. Occasionally it will blow out the heat its suppose to, but not for hours. I looked inside the furnace and see the flame is still lit and don't understand why it won't kick heat on. I have thermostat...
I live in an apartment/condominium renting from an owner directly. We are directly responsible for any maintenance or repair work. Our heating unit is blowing out cold air past two days. Please advise on what could be possibly going wrong and how to resolve the problem without hiring someone.
I live in Minnesota and have a 10+-year-old Tempstar NTG3100GFA1 furnace. It uses natural gas and is a split system. It also has a vanEE air exchanger and in-line humidifier with a programmable Honeywell thermostat. 1 1/2 months ago the furnace stopped working - the blower was blowing cold air...
I have a Concord furnace that started blowing cold air continually today. The LED on the Honeywell unit is blinking 4 times indicating the limit switch or rollout? The filter was very dirty so I replaced it... then tried powercycling the unit, etc. but the LED still blinks. Is there an easy...
I would like to know why my unit is blowing cold air when it is set on HEAT?:confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
