 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
- Item 1
- Item 2
|
||||
|
Cold air blowing from furnace with a flame
I have a gas furnace that is 4 years old. For about 3 weeks now it has been blowing out cold air. Occasionally it will blow out the heat its suppose to, but not for hours. I looked inside the furnace and see the flame is still lit and don't understand why it won't kick heat on. I have thermostat set at
|
||||
Check out some similar questions!
This is an all electric mobile home that has an outside air conditioner with heating system. It is blowing cold air when the heat is turned on at the thermoniter.
York diamond 80 furnace turns on when activated but no flame ignites and runs w/ cold air
I live in Minnesota and have a 10+-year-old Tempstar NTG3100GFA1 furnace. It uses natural gas and is a split system. It also has a vanEE air exchanger and in-line humidifier with a programmable Honeywell thermostat. 1 1/2 months ago the furnace stopped working - the blower was blowing cold air...
Ours is a 2 level house (1995), both levels heated by the same furnace ( YORK Multiposition Gas-Fired Furnace MODEL P2MP 32-112 MBH OUTPUT) . We have two digital thermostats (Hunter Programmable type) located on each floor. We were out for a few days and when we came back the lower level is getting...
Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
