Goodman gmp125-5

bobv103 Posts: 1, Reputation: 1

New Member

Oct 29, 2011, 02:46 PM

Goodman gmp125-5

My goodman gmp125-5 won't start up. The fan motor runs for a second, then stops. The furnace does not go through the rest of it's cycle. Occasionally it starts and runs once or twice, then stops working for a day or so.

Check out some similar questions!

How to fix Goodman GMP125-5 furnace? [ 3 Answers ]

I have a GMP 125-5 Changed hi limit and board. Soon as it is powered up the blower comes on even with the T-stat in the Off position

I have a Goodman GMP125-4. [ 1 Answers ]

Yesterday replaced the gas valve; today furnace worked a few times, now flames will not ignite; furnace attempts to turn on burners when it doesn't, it cycles off and give me 9 (nine) blinks. I'm thinking mother board; still trying to narrow down problem. Any suggestions?

Goodman gmp125-5 won't ignite. [ 1 Answers ]

I have a goodman gmp-125-5. The igniter ignites but the gas valve doesn't turn on. How do I trouble shoot to determine the problem ? I get a slow blinking light that I interpret to be a "1" on the mother board indicating a problem with ignition.

Goodman gmp125-5 motherboard shorts [ 1 Answers ]

I have a Goodman furance that I have replaced the motherboard 3 times they last about 6 months. Every time it happens the board blinks 3 times which means a vent issue but when I check the switch current its correct. We do have power outages. I also noticed some discoloring were the plug(runs from...

Goodman GMP125-4 starts up but does not ignite [ 3 Answers ]

I have a Janitrol / Goodman GMP125-4 gas furnace. Two years ago we replaced the motor, capacitor and the venter blower assembly. Last year (Nov 2006) we replaced the thermostat with a Honeywell programmable thermostat and then followed that with replacing the original integrated circuit module...

View more questions Search

Check out some similar questions!

Add your answer here.