 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My kg6rc 080c-16b furnace won't start
After discovering my furnace was giving an error code of 2 blinks, saying the pressure switch is open with inducer on, I replaced the pressure switch. I checked all drains, intake and exhaust outlet for clogs or leaks and nothing, yet it still won't start? I have even gone as far as to remove the inducer motor, when off I noticed the plastic ring between it and where it mounts had signs of dry rot, with an edge of it even crumbled away. My question is about that ring. Does that connection have to be air tight in order to build enough pressure to apply the pressure switch? Any other leads or ideas would also be appreciated, thanks JForristal
|
||||
Check out some similar questions!
Blower motor on all the time. No heat from furnace. Why?
I a igniter gibson warm air furnace with hot surface ignition. Model number kg6rc080c-16b serial number kga010905065
I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...
I have a nordyne model KG6RC 100C-20B furnace. Woke up this morning and the blower is not coming on. The red light on the circuit board is blinking twice in a row every few seconds. I found the code which reads-2 blinks. Pressure switch is open with inducer fan on. What is the best way to repair?
Whem I turned on the thermostat, the furnace does nothing, and the red l.e.d. blinks twice. Fuse is o.k. wiring o.k. I thought that at least the induction motor should activate.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
