Ask Experts Questions for FREE Help !
Ask
    Heyjude101's Avatar
    Heyjude101 Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 24, 2011, 09:32 AM
    Can you drill into a header for wiring?
    The header is above a sliding glass door, can I drill into the header for wiring purposes?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Oct 24, 2011, 03:03 PM
    Yes you can but you will have to surface mount the box. How will you feed the wire from the switch to the hole? If you are using 14AWG, a 1/2" hole is sufficient.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Obama: Drill, Brazil, Drill! [ 11 Answers ]

Words fail me...

Drill baby drill [ 13 Answers ]

Remember when candidate Obama campaigned against off shore oil drilling ? The Early Word: Drill, Obama, Drill - The Caucus Blog - NYTimes.com And another one's gone ;another one bites the dust.....(Queen) Under the President's new plan 167 million acres of the Atlantic coast, would be...

Drill drill drill [ 10 Answers ]

BP , Conoco Phillips, and the Brazilian company Petroleo Brasilero SA,ignoring the nay sayers ,drilled a little deeper(35,055 feet) in the Gulf of Mexico ,at a place called Tiber Prospect (250 miles southeast of Houston) ,and guess what they found ? Yes ,the Gulf has not been sucked dry Their find...

What kind of drill do I need to use to drill holes for 1 1/2" pvc plumbing. [ 6 Answers ]

I'm running 1 1/2" pvc for a basement bathroom vanity and a wet bar. Do I need to get a Forstner bit or is just a regular hole saw best for drilling my 2x6 wall studs? Also, is 2" the correct size, or should I go to 2 1/8" or 2 1/4".


View more questions Search