Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why?
[ 0 Answers ]
Blower motor on all the time. No heat from furnace. Why?
Gas furnace blower motor won't start/slow to start
[ 0 Answers ]
I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...
Furnace will not start
[ 4 Answers ]
I have an older model sears searies 600 model number 867761833 heater. The pilot light is on but the furnace will not start. The programmable thermastat is only a year old but I put new one in any way. I also changed out the thremocouple. A few weeks ago I noticed that it would start then stop a...
Furnace ignites but blower won't start till furnace shuts down.
[ 7 Answers ]
(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...
Gas furnace has an intermittent pilot, pilot lights, furnace tries to start
[ 3 Answers ]
Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks View more questions Search
|