Ask Experts Questions for FREE Help !
Ask
    bigbeavercrew's Avatar
    bigbeavercrew Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2011, 02:15 PM
    Wiring Multiple Lights and receptacle on One Switch?
    One switch 3 lights and one outlet. How to wire?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 20, 2011, 03:13 PM
    Where is the switch in relation to the outlet and lights? Are you planning to use the switch for the outlet or plan to have the outlet always hot? Depending on your setup and desires, you may be able to use just a 2 conductor feed or a combination of a 2 and 3 conductor wire setup.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring multiple lights in different locations off same switch [ 1 Answers ]

I am trying to wire multiple lights (under-cabinet lights in the kitchen) from a switch. The lights are in three different directions from the switch so I am not sure if parallel wiring would work. Would it be up-to-code to twist-cap all of the wires in the switch box? What other options do I have?

Wiring multiple lights with a 3 way switch [ 6 Answers ]

How do you wire multiple lights using a 3 way switch? I wired multiple lights using a 3 way switch and when I turn on the switch, the lights are dim. What did I do wrong?

Wiring Schematic for single switch -- multiple lights [ 1 Answers ]

I have three light canisters installed in a line. There is a motion sensor switch that services several other lights in this room. Please show me the precise white/black wiring requirements/schematic from this same switch in order to get these three new lights connected properly. Presently I...

Multiple Lights from one switch [ 1 Answers ]

Hi there, was wondering what is the best way to wire multiple lights from one switch? When I say multiple I mean about 6 can lights in a kitchen. I will be running a new circuit from the box. I have always wired 2 or 3 lights from a single junction box which contains the power, the switch and...

Wiring one switch for multiple lights [ 2 Answers ]

I understand the wiring for a single switch for a single light but what do I do with multiple lights on the one switch without making the whole circuit run off that switch. There are other outlets that need constant power on the same line as the two lights.

View more questions Search