Ask Experts Questions for FREE Help !
Ask
    MarcD's Avatar
    MarcD Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2011, 01:45 PM
    Ut electronic controls 1018 light blinks 2 times?
    Hired Hand heater not coming on. The UT brain is blinking twice. It was working fine off a 100pnd tank last winter. I had a large tank installed and it will not fire. It will normally kick the fan on and the igniter even when out of gas. There is no fan and the igniter is not glowing. Any ideas?
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #2

    Oct 18, 2011, 07:48 PM
    This is usually a pressure switch code.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Red light blinks 4 times [ 0 Answers ]

Blower turns on but no heat. No flame. Gas is on. Red light flashes 4 times

Goodman GMP075-3 RevB Light blinks 3 times. [ 1 Answers ]

I have a Goodman GMP075-3 RevB. The fan for the exhast comes on but the starter does not heat up and the burners do not go on. Light blinks 3 times. This means the Venter Pressure switch vent is blocked. What does that mean? There is a rubber hose on the exhast fan that when I blow into it, I...

My goodman furnace led light blinks 3 times what can this be [ 1 Answers ]

Disk Drive green power light blinks 3 times [ 2 Answers ]

My computer is a HP Windows Home Vista. I'm trying to install a game disk. I insert the disk and it starts spinning. It will not compelte the process. Nothing comes up on the monitor. It tries for a very short time then the green light blinks three times. It repeats the 3 x's blinking 3 x's then...

Goodman pgj036100-1 blinks 4 times [ 2 Answers ]

My goodman pgj036100-1 will start burners, heat for about 60 seconds flames go out shuts down and light blinks 4 times

View more questions Search