Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode
 [ 10 Answers ]
 I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,... 
How to Wire a Thermostat to blower fan for alternate heat source
 [ 5 Answers ]
 Hello all I just built a plenum around my coal stove and I need to wire in a stat , limit switch to run a blower fan . Thanks Steve PS I have all the parts off and hot air oil furnace. 
Blower Fan doesn't work after installing thermostat
 [ 1 Answers ]
 I was installing a new Rite Temp digital thermostat to replace my old, but still working Weathertron. I connected all of wires properly, even tested it before I permanently mounted it to the wall and the A/C and furnace blower fan worked fine. Apparently, as I was attempting to push the excess... 
Why doe the blower fan shut of every 2 minutes instale a new thermostat
 [ 1 Answers ]
 Why does the blower fan shut off every 2 minutes I installed a new thermostat and it still is the same 
A/C blower fan won't stop when thermostat is off
 [ 7 Answers ]
 
Sorry for the separate thread... I had a bad blower fan up in the attic. I ended up taking apart the blower and seeing that the fan was completely disgusting and rusted through. After a very hot weekend without A/C, I took the fan to a parts wholesaler and got a new one. It was harder than I... View more questions Search 
  |