 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil sp80 will not light
I have a heil sp80 furnace. The furnace will not light in the gas chamber, I feel like there is no gas there to light. Thermostat calls for heat - combustion fan starts-igniter glows - then nothing other then it keeps trying on its schedule. I changed the smart valve thinking that was it, but it was not. I'm thinking control board, but I'm open to other sugestions. Any help is much appreciated, thanks
|
||||
Check out some similar questions!
I would also like a spec sheet for the unit
I own a Heil SP80 residential furnace. Just recently, I noticed the blower motor(room air circulation) failed to run after the furnace ignited and heated the heater box. When I manually rotated the blower motor fan to get it started the blower motor would run on its own but only at low speed... I...
Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
