Ask Experts Questions for FREE Help !
Ask
    kenshuler's Avatar
    kenshuler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2011, 11:19 AM
    Change 100 amp to 200 amp
    I have a 100 amp panel and I want to upgrade to a 200 amp panel do I need to change the meter base or will it take care of what I need how can I tell
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 13, 2011, 11:25 AM
    The utility serving your house will be able to tell you what is needed for the upgrade. I wouldn't be surprised if they not only want a new meter base but also an outside service disconnect. In GA, this is mandated for all new service and service upgrades.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Oct 13, 2011, 02:18 PM
    You are looking at a service upgrade, not just a panel change.
    This is everything from the utility connections at the top of the house all the way down to the panel, including upgrading the grounding and bonding.

    An outside disconnect is not required in NJ as far as I know. There are only a few places in the US where this is mandatory.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running 100 amp service panal 200 ft away from main 200 amp service [ 4 Answers ]

I am looking to find out how big the wire needs to be to carry the load. This will be a 100 amp service coming from a 200 amp main . It will need to travel 200 to 250 ft underground to a barn. If some one could help me that would be great thaxs)))

Can I downgrade a 200 amp service with a 200 amp main by adding a 100 amp breaker to [ 1 Answers ]

Can I downgrade a 200 amp service to a 100 amp service by adding a 100 amp breaker to the panel

100 amp main, 100 amp service wire, 200 amp sub panel? [ 2 Answers ]

I am moving my sub panel and upgrading to a 200 amp service, but in phases. The first phase is to move the panel due to some remodeling. I want to put a 200 amp panel in the laundry room with a 200 amp breaker. I have 100 amp feeder wire going to it (AL 2/2/2). Outside I have the meter can and...

Change 100 amp to 200 amp panel [ 2 Answers ]

I have an older cottage with a 100 amp fuse panel.I would like to change over to a 200 amp breaker panel.Can I install the 200 amp panel along side the old one , change over my wiring to it then run the main incoming power to the main breaker of the 200 panel ?I also want to run power to a new...

View more questions Search