Ask Experts Questions for FREE Help !
Ask
    rainingoutside's Avatar
    rainingoutside Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2011, 07:00 PM
    How do I install a Honeywell programmable thermostat?
    How do I install a Honeywell programmable thermostat if the only wires I have coming out of my wall are red and black, and neither of them are labeled?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 14, 2011, 08:59 AM
    How many red and black wires do you have ? Are they still installed to the old tstat?, if so tag them seporatly as you remove them as to the markings on the old tstat
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell Programmable Thermostat [ 2 Answers ]

Should My Thermostats Panel Operate On The 2 Aa Backup Batteries Or Be Hardwired To Common And Have Batteries As Backup When Power Is Out? Panel Lights Up With Batteries In, Does Not Without Batteries. Don't Know Where Common Wire Originates From. Can I Splice Into One Of The Other Wires, G, Y,...

Trying to install a RTH2310 Honeywell Programmable Thermostat [ 3 Answers ]

I only have 2 wires coming from the wall, one was labeled R5 and one 4 on the old wall plate. The manual shows connecting more. Do I have to run more wiring?

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Honeywell Programmable Thermostat [ 2 Answers ]

I just changed the batteries on my Honeywell Chronotherm IV Plus, programmable thermostat and the temperature shown for the room is extremely high (104 degrees now) when the room is about 67 degrees. How do I fix?

Honeywell programmable thermostat [ 1 Answers ]

My thermostat's display is showing - AC and the heat will not come on, I removed it and replaced the batteries to no avail? What can I do to get the heat to work again? It is 40 degree's here

View more questions Search