Ask Experts Questions for FREE Help !
Ask
    cher123's Avatar
    cher123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2011, 06:38 PM
    Noma programmable 7 day thermostat product #52-2558-8
    Why does my Noma 7- day programmable thermostat product #52-2558-8 only blow warm air even when I put it on cool
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #2

    Oct 11, 2011, 07:19 PM
    There could be a variety of problems here... was this an original stat or is it a replacement?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma Programmable thermostat 52-2558-8 'Lo' humidity % and 'Lo' for the current temp! [ 0 Answers ]

After being installed for 1 week my Noma Programmable thermostat 52-2558-8 read 'Lo' humidity % and 'Lo' for the current temperature! This is not listed anywhere in the manual. And, the furnace was off-the program was not working. I assume it's not the battery because a low battery warning is...

Noma programmable thermostat 52-2558-8 [ 1 Answers ]

:confused: I just replaced an older Honeywell T87F (round and non-programmable) thermostat with a NOMA Programmable 52-2558-8. The Honeywell had the following wires (connections): R RH G Y W The NOMA has the following connections:

Installing a noma 5+1+1 day Programmable Thermostat and I'm over heating [ 1 Answers ]

Greetings, I am replacing the original mercury thermo in the house we purchased about 6 months ago. After installing it to the best of my knowledge (I read the little booklet) I found that the furnace (a oil powered water heater which is pumped throughout the house) is heating up the house well...

View more questions Search