 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Noma Programmable thermostat 52-2558-8 'Lo' humidity % and 'Lo' for the current temp!
After being installed for 1 week my Noma Programmable thermostat 52-2558-8 read 'Lo' humidity % and 'Lo' for the current temperature! This is not listed anywhere in the manual. And, the furnace was off-the program was not working. I assume it's not the battery because a low battery warning is supposed to come on. What's up?
|
||||
Check out some similar questions!
On this noma thermostat I have no manual and the back light is not working. How do I get this to start working
:confused: I just replaced an older Honeywell T87F (round and non-programmable) thermostat with a NOMA Programmable 52-2558-8. The Honeywell had the following wires (connections): R RH G Y W The NOMA has the following connections:
Noma 52-2558-8 programmable thermostat -------------------------------------------------------------------------------- I have just installed this new thermostat to replace an old non programmable one. I have a gas furnace, no air conditioning, my old thermostat have five wires Red, Green...
Need to relocate a Noma programmable thermostat, it has 2 parts, the thermostat & base, how do you separate the 2?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
