 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ask about a pool pump?
Help? I have been researching a new pump. I have a 24,000 gallon pool,buil in spa-fountain, 4 total 2 inch returns, a heater and a cleaner with booster and a 72 Sta-rite DE filter. Longest pipe run is 106ft, shortest 55ft and the others 70ft, replacing a 2hp Sta-rite... factor 1.1... 1st pump failed after 5 yrs, 2nd pump after two years ( Do I have the correct size pump)... I almost pulled trigger on SP4020 Hayward Northstar- full rated 2hp X 1.20= 2.4, but I found a SP4015 Northstar - max rated 1.50hp x 1.60= 2.4.. are these motors the same thing? What will be the actual difference for me? Thanks, Jeff Seger Texas
|
||||
Check out some similar questions!
My in-ground pool pump hums when I turn the power switch on but it doesn't start. If I leave the power on for too long it trips the circuit breaker. The pool is 10 years old. Do pool pumps need to be oiled? I thought they were sealed and required no additional lubrication.
Can you use the Intermatic T106R switch to control a two speed 220v motor?
Have a inground pool about 5 yrs old that we replace motor every yr,the wireing & amount of juice is OK it's the sealed bearings that start squealing an freeze up, 2ND ? The well pump is 220v / 2 wire direct to breaker ,its on or off nothing fancy an has worked for years except this yr ,runs...
I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
