Ask Experts Questions for FREE Help !
Ask
    djchap's Avatar
    djchap Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 4, 2011, 04:47 PM
    Is a honeywell pro th3110d right for heat pump and heat coil unit
    Is a honeywell pro (th3110d) the correct thermostat for heat pump and heat coil unit
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 4, 2011, 06:13 PM
    Should be fine for a heat pump. Hope you have some experience installing a stat, here the manual http://www.forwardthinking.honeywell...ll/69_1846.pdf
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #3

    Oct 5, 2011, 10:44 AM
    The honeywell 3110D I looked uo is for single heat and cool only, if you plan to use heatpump only and not have a backup furnace/airhandler you can use it... for HP and furnace you need a 2 heat/1 cool tstat.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Goodman heat pump, model GSH130361AD, in heat mode outside unit does not start up. [ 10 Answers ]

Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

Honeywell pro 6000 heat pump Thermostat [ 9 Answers ]

I was told by an AC/Heat repair man that the Honeywell Pro 6000 is the best way to go since I can't afford the top of the line ones they have. My problem is there are so many different model numbers in the Pro 6000, which one is best, which one should I get? I have a heat pump system.

Why does my air handeling coil freeze up when the heat pump is in heat mode? [ 3 Answers ]

I have a TRANE XL 1200 heat pump. When in the heat mode the air handeling coil freezes up, enough to block the air flow. I can turn the heat pump off and leave the air handeling unit air circulating fan on and get the ice melted. After 30 minutes or so I can turn the heat pump back to the on...

New Outside Condsing Unit, Bad indoor Coil - Go with Heat Pump or Buy New Coil? [ 7 Answers ]

Hi All, Here is my issue. Recently, our home warranty company paid to replace a 25 year old 7 SEER Borg Warner outside unit, but swore up and down that the indoor Borg Warner Coil would be OK with the new 10 SEER Carrier. We no longer have this home warranty company and they are not standing...


View more questions Search