Ask Experts Questions for FREE Help !
Ask
    JAMIE36's Avatar
    JAMIE36 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2011, 11:20 AM
    Whirlpool AWZ8578 dryer is filling with warter HELP
    Why is my awz 8578 filling with warter? Its at the heat exchanger?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 4, 2011, 02:30 PM
    A plugged vent will not allow th evaported WATER to get exhausted. Make sure the vent is open and clear.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Oct 4, 2011, 11:55 PM
    I think you need to tear it down and clean it out. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool AWZ8578 tumble dryer making a grinding noise [ 2 Answers ]

I have a whirlpool condenser dryer, it has started to make a grinding noise when it turns clockwise, its fine on the anticlockwise. Has anyone got any ideas please? Many Thanks Lesley

Whirlpool washing machine won't start after filling [ 0 Answers ]

After filling it won't do anything but if I turn it to spin cycle it will work but the spin cycle is the only thing that works

Whirlpool washer skips filling and goes to agitation [ 1 Answers ]

Hello, My Whirlpool washer model LSR8244EQ1 goes straight to agitation when I turn it on to start a load. It never fills with water. I thought it was a timer issue but a new one didn't change the problem. Is there a sensor that is telling the unit it is full and ready to start washing....

Whirlpool elite washer not filling with water [ 1 Answers ]

I have been filling my washer with a hose from my downstairs sink. When it gets to the rinse cycle I have to fill it AGAIN:mad: I called sears and told them what was wrong but they sent me the wrong part:mad: I was sent the pump that pumps the water out! Please help!:confused:

Slow Filling Whirlpool Tub [ 6 Answers ]

I'm in the process of buying a new home. During the home inspection it was noted the whirlpool tub in the master bath fills very slowly. By slowly I mean it took 10 minutes to get the water level above the jets. The water pressure is fine, 60 psi. I'm thinking there may be a flow restrictor...

View more questions Search