Ask Experts Questions for FREE Help !
Ask
    mlbennett's Avatar
    mlbennett Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2007, 05:22 PM
    Whirlpool elite washer not filling with water
    I have been filling my washer with a hose from my downstairs sink. When it gets to the rinse cycle I have to fill it AGAIN:mad: I called sears and told them what was wrong but they sent me the wrong part:mad: I was sent the pump that pumps the water out! Please help!:confused:
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 5, 2007, 05:49 PM
    It sounds like it's the water fill valve. Can be purchased a local appliance parts house for around $35. You will ned to know the model #.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite washer leaking water [ 1 Answers ]

My kenmore Elite Washer is leaking water from back. It is not from any of the tubes ( hot, cold water and drain tube are all dry). It is from black hole on the back. It starts to leak water when it is in the washer cycle about 5-7 minutes. I have tried for small load to make sure it is not...

Whirlpool washing machine not filling up or holding water [ 1 Answers ]

I have a Whirlpool washing machine model # LSQ8243hQ0 that when I set the dial to run a load it does not fill up with water. I tried to fill it from an adjacent sink and it does not seem to be holding water either. Any ideas?

Sears elite catalyst washer- no water in wash cycle [ 1 Answers ]

Hi, I have a 4 years old Sears elite catalyst washer and recently I find there is no water when machine is in wash cycle. The water comes out when machine is in rinse cycle. Does anyone know what is the problem? How to repair it? Thanks Jacky

Slow Filling Whirlpool Tub [ 6 Answers ]

I'm in the process of buying a new home. During the home inspection it was noted the whirlpool tub in the master bath fills very slowly. By slowly I mean it took 10 minutes to get the water level above the jets. The water pressure is fine, 60 psi. I'm thinking there may be a flow restrictor...

View more questions Search